皓天告訴您，為何燈具要做冷熱沖擊試驗測試？

【概述】

冷熱沖擊試驗是用于考核產品對周圍環境溫度急劇變化的適應性，是裝備設計定型的鑒定試驗和批量生產階段的例行試驗中不可缺少的試驗，在有些情況下也可以用于環境應力篩選試驗。

The thermal shock test is used to examine the adaptability of the product to the rapid change of ambient temperature. It is an indispensable test in the identification test of the design of equipment and the routine test in the stage of mass production. In some cases, it can also be used in the screening test of environmental stress.

【實驗/設備條件】

燈具行業做冷熱沖擊試驗的原因有：

1）、燈具的塑膠外殼無法承受環境能力，在高低溫沖擊時，LED塑膠外殼容易催化破壞。

2）、燈管在溫度急劇變化環境下會出現燒壞的情況。

3）、照明燈的電路板芯在冷熱沖擊環境下容易短路。

The reasons for the lamp industry to do the cold and hot shock test are as follows:

1) the plastic shell of the lamp can not withstand the environmental capacity, when the impact of high and low temperature, the plastic shell of the LED is easy to catalysis damage.

2) the lamp tube will burn out in the environment of rapid temperature change.

3) the circuit board core of the lamp is easy to short circuit in the environment of cold and hot shock.

【樣品提取】

若燈具體積大，可抽取1-2臺燈具做試驗，若燈具體積很小，可抽取100-200支做測試。根據貴司的的測試條件，若沖擊試驗有緩沖的測試要求的，則選擇三箱冷熱沖擊試驗箱。若試驗要求迅速5s以內，沒有緩沖要求，則選擇兩箱冷熱沖擊試驗箱。

If the volume of lamps is large, 1-2 lamps can be extracted for test; if the volume of lamps is small, 100-200 lamps can be extracted for test. According to the test conditions of your company, if the impact test requires cushioning, three boxes of cold and hot impact test boxes should be selected. If the test requirement is quick within 5S and there is no buffer requirement, choose two boxes of cold and hot impact test chamber.

【實驗/操作方法】

打開皓天冷熱沖擊試驗箱，設置您所需的測試參數，舉例：沖擊溫度設定在-40℃至150℃，做5個循環，每個循環有99組，燈具通電測試，點亮直至試驗結束，燈具自動熄滅。

Open the Haotian cold and hot impact test chamber and set the test parameters you need. For example, the impact temperature is set at -40℃ to 150℃, and 5 cycles are performed, each cycle has 99 groups. The lamps are energized and lit until the end of the test, and the lamps are automatically extinguished.

【實驗結果/結論】

合格的燈具在冷熱沖擊試驗的測試過程中，燈具在經過高溫高壓測試后，不能出現表面脫漆、變色、開裂、材料變形等異?，F(xiàn)象。燈具在經過沖擊測試后，不能發生漏電，點等不良等電氣異常現象。

Qualified lamps and lanterns in the cold and hot impact test process, the lamps and lanterns after high temperature and high pressure test, can not appear the surface paint off, discoloration, cracking, material deformation and other abnormal phenomena. After the impact test, no electrical anomalies such as leakage,

bad lighting and other electrical abnormalities.