采用Katanax熔融機 X-ray fluorescence analysis of sludge ash from sewage Glass bead/x-ray fluorescence spectrometry of the sludge incineration ashes generated in sewage processing was developed for the determination of ten major components (Na2O, MgO, Al2O3, SiO2, P2O5, K2O, CaO, TiO2, MnO, Fe2O3) and five minor elements (Zn, Cu, Cr, As, Pb). Sewage sludge ashes consisted of rockforming minerals and phosphate crystals that had been used for phosphorus removal. Ash samples were melted and molded with lithium tetraborate to 35 mm diameter glass disks in a PtAu crucible. Analytical results of ten major components and five minor elements agreed well with the recommended values of a phosphate rock standard reference material (NIST SRM 694). Elemental compositions of sewage sludge ash from seven sewage-processing plants in Japan were determined using this method. Concentrations of Fe2O3, SiO2, and CaO, along with loss of ignition in sewage sludge ash mutually differed among the sewage-processing plant products. Seasonal variations in concentrations of ten major components and five minor components of ash samples produced from October 2001 to September 2002 were determined using the proposed method. Concentrations of SiO2increased with the inflow of gravel by rainfall, thereby decreasing concentrations of P2O5 originating from excreta and microorganisms. Copyright  2008 John Wiley & Sons, Ltd. KATANAX K1全自動電熱融熔機 KATANAX K2全自動電熱融熔機