熔體流動速率儀是用于測定熱塑性樹脂的熔體質量流動速率（MFR）熔體體積流動速率（MVR）和熔體密度，它不僅適用于熔融溫度較高的聚碳酸酯尼龍氟塑料聚芳砜等工程塑料,也適用于聚乙烯聚苯乙烯聚丙烯ABS樹脂聚甲醛樹脂等熔融溫度較低的塑料測試,廣泛地應用于塑料原料制品石油化工等行業以及相關大專院?？蒲袉挝缓蜕虣z部門 1.1 This test method covers measurement of the rate of extrusion of molten resins through a die of a specified length and diameter under prescribed conditions of temperature, load, and piston position in the barrel as the timed measurement is being made. 1.2 Procedure A is a manual cutoff operation based on time used for materials having flow rates that fall generally between 0.15 and 50 g/10 min. Procedure B is an automatically timed flow rate measurement used for materials having flows from 0.50 to 900 g/10 min. By both procedures, the piston travel is generally the same during the timed measurement; the piston foot is about 46 and 20.6 mm above the die. Comparable flow rates have been obtained by these procedures in interlaboratory round-robin measurements of several materials described in 13.1. Provision is made for calculation of melt volume-flow rate as well as melt mass-flow rate. 熔融指數儀